Shenzhen Optostar Optoelectronics Co. Ltd

Model Number: 10/100/1000M Extender#erew Brand Name: OPTOSTAR Key Specifications/Special Features: Descriptions:Can convert optical, electric Ethernet signals between 10/100/1,000M UTP interface (TX) and 1,000m optical fiber interface (FX)Traditional 10/100/1,000M gigabit Ethernet can be extended to the distance of 100km through optical fiber linkThe performance and quality of the products are excellent because of adopting latest gigabit IC from USA and Taiwan6 groups LED indicated lights could fully monitor the working conditions of converters

Easy for users to observe and diagnose the failure of converters

Series gigabit converters could be used alone, but converter card should be inserted to 16 slots rack supplied by crop, which is suitable for the use of network center

Main features:

• Auto negotiation function allows UTP ports to auto select 10/100/1,000M and full duplex or half duplex
• UTP port supports the connection of MDI/MDI-X auto crossover
• Supporting the maximum 1536 byte Ethernet packet
• Supports flow control
• Adopting internal power supply

Technical specifications:

• Operating standards: IEEE802.3z/AB, 1,000 base-T and 1,000 base-SX/LX
• Mac address table: 4K
• Data buffer: 256K
• Connectors: UTP RJ-45, 10/100/1,000Mbps, fiber SC, 1,000Mbps
• UTP cable: Cat 5e or Cat 6 (the maximum distance up to 100m)
• Fiber: multiple modes 50/125, 62.5/125μm (the maximum distance up to 550/224m), single mode 8.3/125, 8.7/125, 9/125μm (the maximum distance up to 100km)
• Flow control
• Full duplex: IEEE802.3x
• Half duplex: back pressure